AAON ASM02780 - BACnet MS;TP and IP Analog Value Parameters (Continued); Analog Value Definitions (Continued)

1-38
Pioneer Gold 3.00 Controller Technical Guide
BACnet
®
MS/TP and IP Analog Values
BACnet
®
Point #
Default
Limit
Range
BACnet
®
Point Name
BACnet
®
Description
Unit
AV:27   Space Sensor Maximum
󰀨
Maximum allowed user setpoint adjustment on the

Fahrenheit
AV:28   Water Valve Opening Delay
Time

compressor operation is allowed
Seconds
AV:29   User Occupancy Override Time  Minutes
AV: 30   
Failure Time

going into compressor cooling.
Minutes
AV: 31   Waterside Econo Heating
Failure Time

going into compressor heating.
Minutes
AV: 32   Supply Reheat Setpoint Temperature setpoint of the discharge air while in

Fahrenheit
AV: 56   Space Temp Override 

Fahrenheit
AV: 57   Space Humidity Override 

Fahrenheit
AV: 58    This is an enumeration:
󰀨󰀨




Table 1-19: BACnet
®
MS/TP and IP Parameter Analog Values (Continued)
BACnet
®
MS/TP AND IP PARAMETERS
BACnet
®
MS/TP and IP Analog Values