2-7
Pioneer Gold 3.00 Controller Technical Guide
SETUP GUIDE
Logging In and Passwords
Logging into the Settings Screens
Select the <Settings> icon found on the bottom right of the
Main Screen and enter your manager or administrator password
using the number keypad to gain access to the setpoint and
NOTE: There are two password levels: Manager and
Administrator. The Administrator sets the
Manager’s password.
Press <Enter> once you have entered your password.
The Password Screen will automatically close, and the Settings
Screen will display. The touchscreen will stay in Administrator or
Manager mode until you log out or until the password times out.
NOTE:
minutes.
Password Clearance Levels
Below is a list of the password levels, default codes, and actions
that can be performed at the various levels.
Level 0 No Password Needed, System Secured
Level 0 users can view alarms and input and output
status points. No changes to schedules or other settings
can be made.
Manager Level - Default: 1988
Manager Level users can view alarms and input and
output status points. They can change Setpoint values.
They can also change the system date and time, but no
USB, and upload setpoints from USB.
Administrator Level - Default: 2425
Administrator Level users have system administration
access and can change the date and time, schedules,
setpoints to USB, and upload setpoints from USB.
system tests and logs. This level is normally reserved
Edit Passwords
WARNING: Make sure you change the passwords as soon
as possible to secure the system.
NOTE: Only the Administrator Level can change
passwords.
From the Administrator Settings Screen, press the <Security>
icon. The Security Screen will appear. See Figure 2-4, this page.
Press <Menu> to return to the Settings Screen.
On this screen, you have two options: Change Manager Password
and Change Administrator Password. Press your menu selection
and enter a four-digit password using the keypad. The numbers
appear in bold at the top of the screen.
NOTE: Do not use the same password for Administrator
and Manager passwords. If you do, each password
will default to Level 0.
Figure 2-4: Security Screen
Security
Change Manager Password
Change Admin Password
Menu
To Next Page
Loading...
Need help?
General
