2-6
Pioneer Gold 3.00 Controller Technical Guide
Administrator Step-by-Step Guide
In order to operate the Pioneer Gold Controller successfully, you
should read this entire guide. This guide will lead you through
its on-board touchscreen operator interface. Below is a quick
overview of each step.
Step 1: Login using your Administrator Password
From the Main Screen, Press <Settings> and enter
your Administrator Password.
Step 2: Change the Passwords
From the Administrator Settings Screen, Press
<Security> to change both your Administrator
Password and the Manager Password.
Step 3: Set the Correct Date & Time
From the Administrator Settings Screen, Press <Clock>
to change the date and time.
Step 4: Set the Schedules
From the Administrator Settings Screen, Press
<Schedule> and set up the controller schedule.
Step 5: Verify Controller Conguration
From the Administrator Settings Screen, Press
<Configuration> and verify the controller’s
Step 6: Set the Setpoints
From the Administrator Settings Screen, Press
<Setpoints> and set up all of the setpoints.
Step 7: Set the Network Settings
From the Administrator Settings Screen, Press
<Network> and set up the network settings.
Step 8: Download Setpoints to USB
From the Administrator Settings Screen, Press <USB>
SETUP GUIDE
Overview
To Next Page
Loading...
Need help?
General
