3 Description
3.1 Intended use
The EVSE is intended for DC high power charging of EVs. The EVSE is intended for
indoor or outdoor use.
• The properties of the electrical grid, the ambient conditions and the EV must
comply with the technical data of the EVSE. Refer to chapter 12.
• Only use the EVSE with accessories that are approved by the manufacturer (ABB
EV Infrastructure) and that obey the local rules.
• Do not use power cabinets from this EVSE with power cabinets from different
EVSEs.
Danger:
General risk
• If you use the EVSE in any other way than described in the related
documents, you can cause death, injury and damage.
• Use the EVSE only as intended.
3.2 Type plate
XX XXXXXX XX
SAP PN XXXXXXXXXXXX
GLOBAL ID XXXXXXXXXX
SN XXXX-XXX-XXXX-XXX
FOR USE WITH ELECTRICAL VEHICLES
XXXX xxx-xxxV MAX XXXA
XXXXX xxx/xxxV XW+PE ~
XXXXX XXXX xxx-xxxV
XXXXX XXXX xxx-xxxV
XXX x.xkW/xxHz
XXXX xxxA
XXXX xxxA
XX XXX xxV xA
ABB B.V.
George Hintzenweg 81,
3068 AX Rotterdam,
The Nederlands
VDE - XXXXxxxx
Class X xxx. xx
XX-XXXXX x
XX-XXXXX x
MADE IN ITALY Prod. date xx xxxx
Weight XXX Kg
SN
GLOBAL ID
Refer to manual
XX-X XX XXXX
IP54
A
B
C
D
E
G
H
I
F
J
K
L
M
A Manufacturer
B Full EVSE type
C Part number of the EVSE
D Serial number
E Internal product code (for the
manufacturer)
F EVSE mass
G EVSE rating
H Address of the manufacturer
I CE mark
J QR code with the internal product
code (for the manufacturer)
K QR code with the serial number of
the EVSE
L Additional EVSE rating data
M Production date
Description
9AKK107992A6488-EN | 004 19
To Next Page
Loading...
