ABB HP CP500 - Charge Post Component Access

10.6 Open the door of the charge post
Preliminary requirements
• Door key of the charge post
Danger:
Hazardous voltage
• Make sure that only qualified personnel has access to the door key.
Note:
• There is one unique door key for each charge post.
• The door of the charge post is under some pressure, to make sure
that it closes watertight.
Procedure
1. Insert the door key (A).
2. Turn the door key counterclockwise to
unlock the door (B).
3. Pull the handle (C).
4. Turn the handle clockwise.
5. Open the door.
10.7 Remove the plinth covers of the charge post
Preliminary requirements
• Set of hex keys
A
1
2
3
4 5
C
B
Access to parts
66 9AKK107992A6488-EN | 004