ABB HP CP500 - Height of User Operable Elements

Parameter Specification
[mm] [in]
Required cable slack for the CAN cable
(measured from the top of the founda-
tion)
1200 47.2
Required cable slack for the tilt sensor
control cable (measured from the top of
the foundation), if applicable
1200 47.2
Parameter Specification
[m] [ft]
Length of the charge cable, with retrac-
tion system
5.3 9.8
Cable reach, approximately 3 118
12.15.3 Height of user operable elements
Z1
Z4
Z6
Z5
Z8
Z7Z3Z2
Parameter
Specification
[mm] [in]
Z1 Advised maximum curb height 102 4
Z2 Bottom of the authentication
cluster
750 or higher 29.5
Z3 CCS connector when holstered –
center of grip
775 30.5
Z4 CHAdeMO connector when hol-
stered – center of grip
790 31.1
Technical data
9AKK107992A6488-EN | 004 81