ABB HP CP500 - Install the Cable Gland Plates

6.3.4 Install the cable gland plates
Preliminary requirements
1. The door is open.
2. The protection cover is
removed.
• Screwdriver, cross
• Set of open spanners
Procedure
1. Install the nuts (A) of the cable glands
over the cables.
2. Install these parts:
a. Cable gland plates (B)
b. Fasteners (C)
3. Tighten the nuts of the cable glands.
A
C
B
Installation
42 9AKK107992A6488-EN | 004