ABB IRB 6640 Foundry Prime - Page 271

NoteAction
xx1500001687
Remove the six attachment screws.8
xx1500001688
Install two screws in the threaded holes to pull
the support shaft with bearing out.
9
Refitting support shaft
NoteAction
xx1500001693
Apply rust protection Mercasol on the edge on
the new support shaft with bearing.
1
xx1500001692
Apply Loctite on surface A and Mercasol on sur-
face B.
2
A Loctite 574
B Mercasol
Continues on next page
Product manual - IRB 6640 Foundry Prime 271
3HAC040586-001 Revision: N
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.4.3 Replacement of support shaft with bearing axis 5
Continued