ABB IRB 6640 Foundry Prime - Page 319

NoteAction
For art. no. see:
• Additional equipment - Foundry
Prime on page 314
xx1000000628
Apply rust protection (Mercasol) on the
machined surface.
2
• A: Mercasol
For art. no. see:
• Additional equipment - Foundry
Prime on page 314
xx1000000629
Apply rust protection (Mercasol) on the
machined surfaces of the piston rod ear.
3
• A: Mercasol
The figure shows the principal method.
xx0900000121
Cut the paint with a knife in the joint
between the rear cover and the balancing
unit housing.
4
Note
Keep the cover for refitting on the new
balancing unit.
Remove the cover with the air nipple.5
Continues on next page
Product manual - IRB 6640 Foundry Prime 319
3HAC040586-001 Revision: N
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.5.4.2 Replacing balancing device (design 2)
Continued