Required equipment
NoteArt. no.Spare part no.Equipment
Includes:
• Gearbox
• O-ring 3HAB3772-58
See Spare partsGearbox, type 1
Includes:
• Gearbox
• O-ring 3HAB3772-57
See Spare partsGearbox, type 2
M8x403HAB7700-55Attachment screw
Quality 12.9 Gleitmo
18 pcs
8.4x13x1.53HAA1001-172Washer
18 pcs
152.0x3.533HAB3772-58O-ring (type 1)
Must be replaced when reas-
sembling the gearbox.
131.0x2.03HAB3772-65O-ring (type 1)
Must be replaced when reas-
sembling the gearbox.
15.5x1.521520431-20O-ring (type 1)
Must be replaced when reas-
sembling the gearbox.
6 pcs
164.7x3.533HAB3772-57O-ring (type 2)
Must be replaced when reas-
sembling the gearbox.
150.0x2.03HAB3772-64O-ring (type 2)
Must be replaced when reas-
sembling the gearbox.
13.1x1.63HAB3772-61O-ring (type 2)
Must be replaced when reas-
sembling the gearbox.
12 pcs
For lubricating o-ring3HAB3537-1Grease
Content is defined in section
Standard tools on page 465.
-Standard toolkit
Complete kit which also includes
Operating manual.
3HAC15716-1Calibration Pendu-
lum toolkit
These procedures include refer-
ences to the tools required.
Other tools and
procedures may
be required. See
references to
these procedures
in the step-by-step
instructions below.
Required equipment - Foundry Prime
NoteArt. no.Spare part no.Equipment
Mercasol3HAC034903-001Rust preventive
Continues on next page
432 Product manual - IRB 6640 Foundry Prime
3HAC040586-001 Revision: N
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.7.4 Replacing gearbox axis 6
Continued
To Next Page
Loading...
