ABB IRB 6640 Foundry Prime - Page 471

DescriptionMarkItem
Press tool D=54D3
Threaded bar, M164
Adapter M16/M20B5
Knurled nut D=80F6
Slide hammer / DistanceC7
Nut M168
Press tool D=85E9
Press tool D=100K10
Press tool D=110G11
Press tool D=90J12
Press tool D=62H13
Removal front shaft design 1 and 2
The following configuration is used for removal of the front shaft Design 1 and 2.
In the figure only Design 1 is shown.
xx0900000026
Configuration:
• 8
• C
• 4
• B
Continues on next page
Product manual - IRB 6640 Foundry Prime 471
3HAC040586-001 Revision: N
© Copyright 2011-2018 ABB. All rights reserved.
7 Reference information
7.8 Dismounting and mounting tool 3HAC028920-001
Continued