Introduction to the manual 13
Introduction to the manual
What this chapter contains
This chapter introduces this manual.
Applicability
This manual applies to the NETA-21 remote monitoring tool and the NEXA-21 extension
unit for , SW version 2.31 or later.
Compatibility
The NETA-21 remote monitoring tool is compatible with various types of ABB drives, wind
turbine converters and solar inverters. The ABB drives compatible with NETA 21 are
shown in the below table:
Drive Type Connection type
ACS310 Modbus (/RTU and /TCP)
ACS320 Modbus (/RTU and /TCP)
ACS355 solar pump Modbus (/RTU and /TCP)
ACS380 Panel bus, Modbus (/RTU and /TCP)
ACS550 Modbus (/RTU and /TCP)
ACx580 Panel bus, Modbus (/RTU and /TCP)
ACSM1 Modbus/TCP
ACSM1 solar pump Modbus/TCP
ACx400 with NEXA-21 extension