ABB NETA-21 - Guest; FTP User Account; External Account

Users 65
If you log on to the UI as User, the front page appears as follows:
 Guest
With the Guest role you have the lowest level access rights. As Guest you can only:
• change My details settings
• view events
• read drive parameters and see the statuses of the devices.
If you log on to the UI as Guest, the front page appears as follows:
 FTP user account
The FTP user account does not give access to log on to the web UI. The account can be
defined to allow an FTP or FTPS access to the memory card.
Note: The unsecured FTP protocol is disabled by default from firmware 2.22 onwards
(FTPS is enabled). To enable the FTP service go to Settings –> Network services –>
Services.
 External account
For information on External account, see chapter Security on page 161.