Overview 19
Overview
What this chapter contains
This chapter contains a short description of the NETA-21.
NETA-21 remote monitoring tool
The NETA-21 remote monitoring tool is used for browser-based remote monitoring of ABB
drives via Ethernet. Multiple drives can be connected to the network by using a panel bus
or through the fiber optic channel of the NEXA-21 extension unit.
Through the NETA-21, you can:
• monitor drives
• read and adjust drive parameter values
• read status information and actual values from drives
• set up and monitor the data logger and save its content to a file
• read the contents of the fault log from monitored devices and save it to the memory
• send email messages on events
• use email for continuous monitoring of drives
• reset a fault on drives
• use an SD card for continuous monitoring of drives
• use an SD card to store all events
• use the FTP server for storing drive parameters and events
• create custom events
• create custom reports: email reports, SD card reports and FTP reports.
To Next Page
