Users 61
In the lower part of the User properties panel there are two buttons, whose names
change by the context. When you are creating a new user, there are the following buttons:
• Create user for saving the new user settings
• Cancel for canceling the creation and removing new_user (default name) from list.
When you are modifying an existing user, there are the following buttons:
• Apply changes for saving the modifications
• Restore defaults for resetting the values to a previously saved user setting.
When the new user logs on to the UI for the first time, he/she is prompted to change the
password.
User roles
The user roles to be selected from the User role drop-down list on page 38 are the
following:
• FW admin
• Tool admin
• Network admin
• Drive expert
• User
• Guest
• FTP user account.
• External account
Tool admin
With the Tool admin role you have the full access rights to the NETA-21. In addition to the
access rights listed for Drive expert and Network admin, the Tool admin role allows you to:
• add and remove NETA-21 user accounts (and modify permissions of other users)
• perform the firmware update of the NETA-21 through the SD card or PC
• back up and restore the NETA-21 firmware and NETA-21 settings to/from the SD card
• enable or disable the factory login (factory support account)
• reset the tool settings to the default settings (restore the factory settings)
• add and remove extra software packages
• change report settings.