Introduction to the manual 15
Before you start
It is assumed that the drive is installed and ready to operate before starting the installation
of the NETA-21.
In addition to conventional installation tools, have the drive manuals available during the
installation as they contain important information not included in this manual.
Contents
The manual consists of the following chapters:
• Safety presents the safety instructions which you must follow when installing a NETA-
21.
• Introduction to the manual introduces this manual.
• Overview contains a short description of the NETA-21.
• Mechanical installation contains a delivery checklist and instructions on installing the
NETA-21.
• Electrical installation contains the cabling and connection instructions of the NETA-21.
• Start-up contains instructions on how to start up the NETA-21.
• Program features contains feature descriptions in more detail.
• Users describes the user management.
• Devices describes how to manage device parameters and use data loggers.
• Networks explains how to set up and configure Ethernet network interfaces of the
NETA-21.
• Events describes how to observe and filter events.
• Reporting describes how to make reporting and trend logging settings for configuring
which time levels and event categories are sent out by a reporting plug-in to be
monitored.
• Tools explains how to manage NETA-21 firmware, factory settings and software
packages.
• Backup and restore describes the backup and restore functions of the NETA-21.
• Memory card describes the tabs under Memory card.
• Frequently asked questions contains how-to instructions for various tasks.
• Diagnostics and troubleshooting explains how to trace faults with the status LEDs on
the NETA-21 and the NEXA-21.
• Technical data contains the technical data of the NETA-21 and the NEXA-21.
To Next Page
Loading...
Need help?
General
