3.14.2.3 Minimum pulse timer TPMGAPC
Function block
GUID-AB26B298-F7FA-428F-B498-6605DB5B0661 V1 EN
Figure 57: Function block
Functionality
The Minimum minute pulse timer function TPMGAPC contains two independent
timers. The function has a settable pulse length (in minutes). The timers are used
for setting the minimum pulse length for example, the signal outputs. Once the
input is activated, the output is set for a specific duration using the Pulse time setting.
GUID-8196EE39-3529-46DC-A161-B1C40224559F V1 EN
Figure 58: A = Trip pulse is shorter than Pulse time setting, B = Trip pulse is
longer than Pulse time setting
Signals
Table 123: TPMGAPC Output signals
Name
Type Description
OUT1 BOOLEAN Output 1 status
OUT2 BOOLEAN Output 2 status
Settings
Table 124: TPMGAPC Non group settings
Parameter
Values (Range) Unit Step Default Description
Pulse time 0...300 min 1 0 Minimum pulse time
Section 3 1YHT530004D05 D
Basic functions
120 615 series
Technical Manual
To Next Page
Loading...
