ABB REF615 L - Insulation tests; Mechanical tests

Description Type test value Reference
• Common mode
• Differential mode
300 V rms
150 V rms
Emission tests: EN 55011
CISPR 11, Group 1, class A
• Conducted, RF-emission
(mains terminal)
0.15-0.50 MHz < 79 dB(µV) quasi peak
< 66 dB(µV) average
0.5-30 MHz < 73 dB(µV) quasi peak
< 60 dB(µV) average
• Radiated, RF-emission
30-230 MHz < 50 dB(µV/m) quasi peak,
measured at 3 m distance
230-1000 MHz < 57 dB(µV/m) quasi peak,
measured at 3 m distance
Table 708: Insulation tests
Description Type test value Reference
Dielectric tests 2 kV, 50 Hz, 1 min
500 V, 50 Hz, 1 min,
communication
IEC 60255-5 and
IEC 60255-27
Impulse voltage test 5 kV, 1.2/50 μs, 0.5 J
1 kV, 1.2/50 μs, 0.5 J,
communication
IEC 60255-5 and
IEC 60255-27
Insulation resistance
measurements
>100 MΏ, 500 V DC IEC 60255-5 and
IEC 60255-27
Protective bonding resistance <0.1 Ώ, 4 A, 60 s IEC 60255-27
Table 709: Mechanical tests
Description
Reference Requirement
Vibration tests (sinusoidal) IEC 60068-2-6 (test Fc)
IEC 60255-21-1
Class 2
Shock and bump test IEC 60068-2-27 (test Ea shock)
IEC 60068-2-29 (test Eb bump)
IEC 60255-21-2
Class 2
Seismic test IEC 60255-21-3 Class 2
Section 15 1YHT530004D05 D
IED and functionality tests
878 615 series
Technical Manual