ADCMT 6244 User Manual

6243/44 DC Voltage Current Source/Monitor Operation Manual
9.2.1 Voltage/Current Source
9-14
Temperature coefficients: At 0 to 50C
Overall accuracy of reverse polarity limiters:
The accuracy of source value and reverse polarity limiters is obtained by
adding the data in the following table to the overall limiter.
(However, stability and temperature coefficients do not apply to the fol-
lowing table.)
Source linearity: 0.012% of range
However, the following errors are added for the 320 mA, 3.2 A, and 10 A
ranges.
Maximum output current: 10 A up to 7 V, 4 A up to 20 V
Maximum tracking voltage: 20 V up to 4 A, 7 V up to 10 A
Voltage source /
Voltage limiter
Range Temperature coefficient  (ppm of setting + V)/C
320 mV
3.2 V
20 V
15 + 30 V
15 + 50 V
15 + 500 V
Current source /
Current limiter
Range Temperature coefficient  (ppm of setting + A + A Vo / 1 V ) / C
320 A
3.2 mA
32 mA
320 mA
3.2 A
10 A
25 + 10 nA + 100 pA
20 + 100 nA + 1 nA
20 + 1 A + 10 nA
20 + 10 A + 100 nA
20 + 100 A + 1 A
90 + 1 mA + 10 A
Vo: Compliance voltage (0 V to 20 V)
Reverse polarity /
Voltage limiter
Range Overall accuracy  (% of setting + V)
320 mV
3.2 V
20 V
0.25 + 8 mV
0.25 + 8 mV
0.25 + 80 mV
Reverse polarity /
Current limiter
Range Overall accuracy  (% of setting + A)
320 A
3.2 mA
32 mA
320 mA
3.2 A
10 A
0.25 + 6.5 A
0.25 + 65 A
0.25 + 650 A
0.25 + 6.5 mA
0.25 + 65 mA
0.25 + 650 mA
Range  (% of setting)
Current source 320 mV 0.01
3.2 V 0.02
10 V 0.07

ADCMT 6244 Specifications

General

Brand	ADCMT
Model	6244
Category	Measuring Instruments
Language	English