ADCMT 7352A - Page 140

7352 Series Digital Multimeter Operation Manual
6.6.4 SCPI Command Reference
6-36
Range configuration and settable maximum value
Measurement
condition
Temperature
sensor
[:SENSe]:TEMPerature:TCouple:
TYPE {K|T}
K: K-type thermocouple
T: T-type thermocouple
[:SENSe]:TEMPerature:TCouple:
TYPE?
Reply: K or T
Ach Bch
Measurement
range notation
DCV ACV
ACV
(AC+DC)
2W DCI ACI
ACI
(AC+DC)
LP-
2W
Freq DCV DCI ACI
ACI
(AC+DC)
2000 nA +1.99999E-06
20 A +1.99999E-05
200 A 200 A200 A +1.99999E-04
2000 A 2000 A 2000 A +1.99999E-03
20 mA 20 mA 20 mA +1.99999E-02
200 mV 200 mV 200 mV 200 mA 200 mA 200 mA (200 mV) 200 mV +1.99999E-01
2000 mV 2000 mV 2000 mV 2000 mA 2000 mA 2000 mA (2000 mV) 2000 mV +1.99999E-00
- - - - - 10 A 10 A 10 A +1.09999E+01
20 V 20 V 20 V (20V) 20 V +1.99999E+01
200 V 200 V 200 V 200  200  (200V) 200 V +1.99999E+02
- 700 V 700 V -
-
(700V) +7.49999E+02
1000 V -
-
+1.09999E+03
2000  2000  +1.99999E+03
20 k 20 k +1.99999E+04
200 k 200 k +1.99999E+05
2000 k 2000 k +1.99999E+06
20 M 20 M +1.99999E+07
200 M +1.99999E+08
NOTE: The range setting is not allowed for the continuity, diode, and temperature measurements. If the range setting is executed, an error
occurs.
Item SCPI command Description
Initial
value