EasyManuals Logo

ADT Focus 200 Plus Installation And Setup Guide

ADT Focus 200 Plus
216 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #202 background imageLoading...
Page #202 background image
FOCUS 200 PLUS Installation and Setup Guide
22-6
450SIM PIR (w/SIM')
A Sentrol model AP450 Passive Infrared Detector that includes a built-in SIM. It provides 9 curtains of
detection of motion in two jumper selectable ranges, 33 ft. and 50 ft. Recommended mounting height is
6 to 10 ft. Communicates with the 472368 SIM Gateway via a two-wire connection. Refer to the
manufacturer’s installation instructions for further details.
AI
=5mA,
SI
=1.78mA
663SIM PIR (w/472366SIM)
A Sentrol model AP633 Passive infrared Detector that includes a standalone SIM (472366) housed in
the same enclosure. When using this device Option 3 MUST be set to
NO
. It provides the detection of
motion in selectable ranges extending 40 ft.; 80 ft. (wide); and 200 ft. (long range) in 12 selectable
patterns. Features Step Focus Curtain technology. Communicates with the 472368 SIM Gateway via a
two-wire connection. Refer to the manufacturer’s installation instructions for further details.
AI
=25mA,
SI
=13mA
669SIM Dual Optic Technology Ceiling Mount PIR (w/SIM)
A Sentrol model AP669 Passive Infrared Detector that includes a built-in SIM. The unit provides two
independent 180° fields of view, enabling the detector to cover a single 180° area or two 180° areas
(360°). Features 60 ft. diameter 360° coverage, 18 full curtains and can be mounted from a height of 8
to 16 ft. without changing lenses. Communicates with the 472368 SIM Gateway via a two-wire
connection. Refer to the manufacturer’s installation instructions for further details.
AI
=11mA,
SI
=6mA
429CTAD Smoke Detector (w/SIM)
An ESL Model 429CTAD Smoke Detector that includes a built-in SIM. Includes a pulse/alarm LED
indicator and a self-test feature that is under program control. Utilizes self-diagnostics that provide
complete verification, and CCC annunciation of drifts beyond its sensitivity range. When detector needs
servicing, replace optical block cover (ESL Model 211). Communicates with a 472368 SIM Gateway via
two-wire connection. Refer to manufacturer's instructions for further details.
AI
=3mA,
SI
=1mA
472367 Door Contact (w/SlM)
An ADEMCO or C&K surface-mount white magnetic door contact with built-in SIM. Unit measures 2-
1/2" L x 1/2" W x 1/2" H and is furnished with an 11-foot (3.4m) cable. Communicates with a 472368
SIM Gateway via two-wire connection. Refer to manufacturer's instructions for further details.
AI
=,
SI
=1mA
472392 Door Contact Spacer
An ADEMCO or C&K surface-mount white magnetic door contact spacer. Measures 2-1/2" L x 1/2" W x
1/8" H.
472371S Overhead Door Contact (w/SIM)
An ADEMCO or C&K surface-mount waterproof overhead door magnetic contact with built-in SIM.
Unit measures 4-5/16" L x 1-11/16" W x 3/8" H and is furnished with a 24" armored metal cable.
Communicates with a 472368 SIM Gateway via two-wire connection. Refer to manufacturer's
instructions for further details.
AI
=,
SI
=1mA
248302 Fuse Holder Kit
For preventing the "pulling down" of power from a SIM gateway due to a short circuit on one of the
power wires of a branch cable. One required for each sensor where branch cable from SIM gateway
drops to within 6 feet of the floor (e.g., overhead door contact) or where branch cable may be subject to a
short circuit due to jarring or other mechanical stress. Consists of an in-line fuse holder with 6" leads
and an 828928 1/10 Amp fuse.

Table of Contents

Other manuals for ADT Focus 200 Plus

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ADT Focus 200 Plus and is the answer not in the manual?

ADT Focus 200 Plus Specifications

General IconGeneral
BrandADT
ModelFocus 200 Plus
CategorySecurity System
LanguageEnglish

Related product manuals