ADT Focus 200 Plus Installation And Setup Guide

FOCUS 200 PLUS Installation and Setup Guide
14-6
< ? FRONT DOOR 20
Gate? Continue >
POINT GATEWAY
< Previous Delete >
This is the
Gateway Screen
.
Enter the Gateway unit number
(0-7)
that this point is associated
with.
Select
Continue
to save the info and move to the next screen.
< ? FRONT DOOR 20
Gate 1 Continue >
POINT GATEWAY
< Previous Enter >
Select
Enter
and then
Continue
to save this info and move to the
next screen.
< ? FRONT DOOR 20
< Replace (N) Done >
Hard ID: _ _ _ _ _ _ _ _
< Previous Enter >
This is the
Hard ID Screen
.
Enter the Hard ID number of the device for the point.
If this is an RF point, enter the serial number located on the bar
code label on the transmitter.
Select
Enter
and then
Done
to save this info and move back to the
Point Info Screen
.
Note:
The
Replace (Y/N)
has no function at this time.
< ? FRONT DOOR 20
Pnt 20 Type 3MD
< Prev Change >
< Quit Next >
This is the
Point Info Screen
.
This screen now displays the summary information for the point.
The first line shows the current name and the second line shows
the point and the type.
Select
Next
to display the info for the next point.
Select
Previous
to move back to the previous screen.
Select
Change
to edit the info for this point.
Select
Quit
and move to
Action Menu #
4 when all points have been
programmed.
Programming the BA Groups' Turn-Off Data
Enter the program mode by entering the Service Code at the operating panel.
< ? Enter choice:
< Lesson Turn on >
< See alarms Reset >
< Quit More >
Action Menu #1
is displayed.
Select
More
three times.
< ? Enter choice:
< Sys info ID codes >
< Name pnt/gps Load >
< Previous First >
Action Menu #4
is displayed.
Select
Name pnt/gps
.
< ? BA GROUP #1
Group 1
< Previous Change >
< Quit Next >
Group Info Screen
.
The system defaults to display the info for
Group #1. The top line shows the current name. The second line
shows the group to which this info pertains.
Select
Next
repeatedly until the info screen for Group #8 is shown.
Select
Next
once more to advance to the next screen.

ADT Focus 200 Plus Specifications

General

Brand	ADT
Model	Focus 200 Plus
Category	Security System
Language	English