5702269-C I/O Communication and Control 4-25
Pinnacle™ Plus+ 10 kW
• FAULTS: customer service information
• STATS: supply statistics
• DEBUG: debug screens
• MEMORY: ROM CRC checksums
• SW_REV: software revision numbers
Checking Service-type Faults
SERVICE → FAULTS
Customer service will use this option.
Checking Service-type Statistics
SERVICE → STATS
Use this option to check the service-type statistics.
CHECKING THE TOTAL ENERGY OUTPUT
SERVICE → STATS → ENERGY
To check the total energy output:
• Press SERVICE → STATS → ENERGY.
4
The total energy output for the unit appears.
CHECKING THE AMOUNT OF IDLE TIME
SERVICE → STATS → TIME
To check the amount of time idle and the amount of time running:
1. Press SERVICE → STATS → TIME.
2. To display the amount of time idle, press the IDLE soft key.
4
The amount of time idle appears.
3. To display the amount of time running, press the RUN soft key.
4
The amount of time running appears.
CHECKING THE NUMBER OF FAULTS
SERVICE → STATS → EVENTS
To check the number of faults:
1. Press SERVICE → STATS → EVENTS.
To Next Page
Loading...