1-6 Safety and Product Compliance Guidelines 5702269-C
Advanced Energy
®
SAFETY DIRECTIVES AND STANDARDS
Installation Requirements
Install this unit according to the following requirements.
Conditions of Use
To comply with the stated directives and standards, you must meet the following
conditions of use:
• Before making any other connection to this device, connect the supplemental
Protective Earth (ground) terminal to an earth (ground) terminal with a copper
wire that is sized according to the applicable requirements.
Table 1-3. Safety Directives
Directive Description
73/23/EEC EC Council directive on the harmonization of the laws of
the Member States relating to electrical equipment
designed for use within certain voltage limits (LVD – Low
Voltage Directive)
Table 1-4. Safety Standards
Standards Description
EN 50178 Electronic equipment for use in electrical power
installations
Operating and maintenance personnel must receive proper training
before installing, troubleshooting, or maintaining high-energy electrical
equipment. Potentially lethal voltages could cause death, serious
personal injury, or damage to the equipment. Ensure that all appropriate
safety precautions are taken.
RISK OF DEATH OR BODILY INJURY. Disconnect all sources of input
power before working on this unit or anything connected to it.
To Next Page
Loading...