ADVANTEST R3131 Series User Manual

R3131 Spectrum Analyzer Operation Manual
Error No.
Error Message
Description
151
Self Test failure.
Pls report to qualified service person.
Self test detected an error.
Please contact a qualified service representative.
152 Self Test failure.
Pls report to qualified service person.
Self test detected an error.
Please contact a qualified service representative.
153
Self Test failure.
Pls report to qualified service person.
Self test detected an error.
Please contact a qualified service representative.
154 Self Test failure.
Pls report to qualified service person.
Self test detected an error.
Please contact a qualified service representative.
155 Broken Freq-Corr data.
Pis Irma to qualified service person.
Freq-Corr data has been destroyed.
Please contact a qualified service representative.
200 Illegal parameters.
The specified parameter is wrong.
201 Software version unmatched.
This software version is incompatible.
202 Can't format a device.
The disk cannot be formatted properly.
203
File or register empty.
The recall command could not be executed suc-
cessfully because the file or register is empty.
204 Trace buffer full.
The area reserved for trace data is full.
205
Device not ready .
The device is not communicable.
206 Read WOE
The file cannot be read out.
207 File not found.
No file has been found.
208
Invalid BPB.
Pls format a disk.
The BPB has been erased.
Please format the disk.
209
Can't delete a file.
(read-only file)
This is a read-only file and cannot be deleted.
210
Media changed.
The disk was replaced with another while it was
being accessed.
211
No disk space.
There is no space on the disk.
212 Read-only file.
This is a read-only file.
213
Read-only media.
This is a read-only media.
214 Root directory full.
The Root directory is full.
215 Invalid boot sector
signature.
The boot sector signature cannot be recognized.
216
CRC error
A CRC error occurred.
217 Invalid disk geometry.
An invalid disk geometry was found.
218 File number is over 999.
Pls reset file counter.
The file number exceeded 999.
Please reset the file counter.
APPENDIX 1 ERROR MESSAGE
A1-2

ADVANTEST R3131 Series Specifications

General

Brand	ADVANTEST
Model	R3131 Series
Category	Measuring Instruments
Language	English