MAINTENANCE
2-29
1. Repeat step 1~5 for parking caliper cable adjusting.
2. When fully tight the cable-adjusting
must adjust rear caliper parking swing arm.
10. Verify the parking brake functions correctly.
11. Carefully lower the vehicle to the ground.
Foot Brake Adjustment
1. Position the vehicle on a level surface.
2. Shift the transmission into neutral (if applicable).
3. Elevate the vehicle by placing a suitable stand
The 4 tires should be slightly off the ground.
4. While rotating the 4 wheels,
adjust the adjuster nut at the
master cylinder piston rod of foot brake.
5. When you begin to feel a slight drag in wheels rotation,
the nut 1~2 full turn.
6. Tighten master cylinder piston rod jammed nut.