Front Panel Key GPIB Command
[SAVE CH4 CAL TRACE ]
[ INTO D1 ] TRACe:DATA D1,CAL4
[ INTO D2 ] TRACe:DATA D2,CAL4
[ INTO D3 ] TRACe:DATA D3,CAL4
[ INTO D4 ] TRACe:DATA D4,CAL4
[ INTO D5 ] TRACe:DATA D5,CAL4
[ INTO D6 ] TRACe:DATA D6,CAL4
[ INTO D7 ] TRACe:DATA D7,CAL4
[ INTO D8 ] TRACe:DATA D8,CAL4
[ BEEPER ON OFF ] SYSTem:BEEPer:STATe OFF|0|ON|1
[ CLOCK SETUP ]
[TIME HHMM ] SYSTem:TIME 0~2359
[DATE MMDDYY ] SYSTem:DATE 10100~123199
[TIMESTAMP SETUP ]
[ 24 HR DD/MM/YY ] HCOPy:TSTamp:MODE CHOice1
[ 24 HR DD.MM.YY ] HCOPy:TSTamp:MODE CHOice2
[ 24 HR YY MM DD ] HCOPy:TSTamp:MODE CHOice3
[ 12 HR DD/MM/YY ] HCOPy:TSTamp:MODE CHOice4
[ 12 HR MM-DD-YY ] HCOPy:TSTamp:MODE CHOice5
[ OPTIONS SETUP ] DISPlay:VIEW OPT
[ MEMORY USAGE ] DISPlay:VIEW MEM
[REMOVE CAPTURE ]
[ CONFIRM REMOVE ] MEMory:DELete[:NAME] TCAPture
[REMOVE WATERFALL ]
[ CONFIRM REMOVE ] MEMory:DELete[:NAME] WATerfall
[REMOVE WTFL REGS ]
[ CONFIRM REMOVE ] MEMory:DELete[:NAME] WREGister
[REMOVE PROGRAMS ]
[ CONFIRM REMOVE ] MEMory:DELete[:NAME] PROGram
[REMOVE RAM DISK ]
[ CONFIRM REMOVE ] MEMory:DELete[:NAME] RDISK
[ FAN SETUP ]
[ FAN OFF ] SYSTem:FAN OFF
[ FAN FULL SPEED ] SYSTem:FAN FULL
[ AUTOMATIC SPEED ] SYSTem:FAN AUTO
[ MORE ]
[ FAULT LOG ] DISPlay:VIEW FTABle
[CLEAR FAULT LOG ] SYSTem:FLOG:CLEar
[ SELF TEST ]
[ QUICK CONF TEST ] *TST?
[ LONG CONF TEST ] TEST:LONG
[ TEST LOG ] DISPlay:VIEW TTAB
[ CLEAR TEST LOG ] TEST:LOG:CLEar
[ S/N VERSION ] *IDN?
Cross-Reference from Front-Panel Keys
to GPIB Commands
B-28
To Next Page
Loading...
