Agilent Technologies Truevolt Series User Manual

ABORt
Aborts a measurement in progress, returning the instrument to the trigger idle state.
Parameter Typical Return
(none) (none)
Abort a measurement in progress:
ABORt
l This command may be used to abort a measurement when the instrument is waiting for a trigger, or for aborting a
long measurement or series of measurements.
Agilent Truevolt Series DMM Operating and Service Guide 107

Agilent Technologies Truevolt Series Specifications

General

Brand	Agilent Technologies
Model	Truevolt Series
Category	Laboratory Equipment
Language	English