Web Interface
The Agilent Truevolt Series DMMs include a built-in Web Interface for monitoring and controlling the instrument via a
Web browser. To begin, connect your instrument to the LAN and enter the instrument's IP address into the address bar
at the top of your PC's Web browser. The Web Interface will appear in the browser as shown below.
Instrument Configuration Tab
The four tabs on the left side of the window select the various interface screens. For example, the third tab takes you to
a screen that shows your instrument's Web configuration.
80 Agilent Truevolt Series DMM Operating and Service Guide
To Next Page
Loading...
Need help?
General
