Utility Menu - System Setup
System Setup configures user preferences, sets the date and time, and sets a power-on message.
User Settings
User Settings specifies user preferences that control how the user interacts with the instrument. These settings are
stored in non-volatile memory and can be saved in a preferences (.prf) file.
Help Language
Help Lang selects the help language for front-panel use: English, French, German, Japanese, Korean, Russian, or
Simplified Chinese. All messages, context-sensitive help, and help topics appear in the selected language. The softkey
labels are always in English.
Number Format
Number Format specifies how numbers are displayed on the front panel: 12,345.6 or 12.345,6. Other possibilities
also exist. For example, you can use the space as a separator.
Sounds
Disables or enables the click heard when a front-panel key or softkey is pressed.
Also enables or disables the audible tone associated with the following features:
l Limits – a measurement limit is exceeded (if limits are enabled)
l Probe Hold – the measured signal records a stable reading
l Diode – the forward bias voltage is between 0.3 and 0.8 V
l Continuity – a short is measured (less than or equal to 10 Ω)
l Error - an error is generated from the front panel or remote interface
This non-volatile setting appears in several different menus on the front panel, but turning the beeper on or off in one
menu affects all of the other menus.
78 Agilent Truevolt Series DMM Operating and Service Guide
To Next Page
Loading...
Need help?
General
