Calibration Message
You can store a message of up to 40 characters in calibration memory. For example, you could store the date of the last
calibration, the date the next calibration is due, or the name and phone number of the person responsible for
calibration.
To read the calibration message, press Utility > Test/Admin > Calibrate or send CALibration:STRing? from the
remote interface.
To change the calibration message, unsecure the instrument and press Utility > Test/Admin > Calibrate > Edit
Cal String or send CALibration:STRing "<string>" from the remote interface.
Agilent Truevolt Series DMM Operating and Service Guide 327
To Next Page
Loading...
