ROUTe:TERMinals?
Indicates which input terminals are selected on the 34461A front-panel Front/Rear switch. This switch is not
programmable; this query reports the position of the switch, but cannot change it.
Do not toggle the Front/Rear switch with active signals on the terminals. This
switch is not intended to be used in this way and may be damaged by high
voltages or currents, possibly compromising the instrument's safety features.
Parameter Typical Return
(none) FRON or REAR
Return the state of the Front/Rear switch:
ROUT:TERM?
l On the 34460A, this query always returns FRON.
Agilent Truevolt Series DMM Operating and Service Guide 113
To Next Page
Loading...
Need help?
General
