Statistics
CALCulate:AVERage[:STATe] {ON|1|OFF|0}
CALCulate:AVERage[:STATe]?
CALCulate:AVERage:ALL?
CALCulate:AVERage:AVERage?
CALCulate:AVERage:MAXimum?
CALCulate:AVERage:MINimum?
CALCulate:AVERage:PTPeak?
CALCulate:AVERage:SDEViation?
CALCulate:AVERage:COUNt?
CALCulate:AVERage:CLEar[:IMMediate]
Reading Memory Commands
FETCh?
R? [<max_readings>]
DATA:LAST?
DATA:POINts:EVENt:THReshold <count>
DATA:POINts:EVENt:THReshold?
DATA:POINts?
DATA:REMove? <num_readings> [,WAIT]
Calibration Commands
CALibration:ADC?
CALibration[:ALL]?
CALibration:COUNt?
CALibration:SECure:CODE <new_code>
CALibration:SECure:STATe {ON|1|OFF|0} [, <code>]
CALibration:SECure:STATe?
CALibration:STORe
CALibration:STRing "<string>"
CALibration:STRing?
CALibration:VALue <value>
CALibration:VALue?
264 Agilent Truevolt Series DMM Operating and Service Guide
To Next Page
Loading...
