a. Set the "hostname." Press Host Name and enter the hostname. A hostname is the host portion of the
domain name, which is translated into an IP address. The hostname is entered as a string using the front-
panel arrow keys to select and change characters. The hostname may include letters, numbers, and dashes ("-
").
b. Set the "DNS Server" addresses. From the LAN configuration screen, press More to go to the second of three
sets of softkeys.
Enter the Primary DNS and Second DNS. See your network administrator for details.
More about IP Addresses and Dot Notation
Dot-notation addresses ("nnn.nnn.nnn.nnn" where "nnn" is a byte value from 0 to 255) must be expressed with care,
as most PC web software interprets byte values with leading zeros as octal (base 8) numbers. For example,
"192.168.020.011" is actually equivalent to decimal "192.168.16.9" because ".020" is interpreted as "16" expressed
in octal, and ".011" as "9". To avoid confusion, use only decimal values from 0 to 255, with no leading zeros.
28 Agilent Truevolt Series DMM Operating and Service Guide
To Next Page
Loading...
Need help?
General
