Agilent Technologies Truevolt Series - Page 283

Calibration Errors (+700...)
+701,"Calibration error; security defeated"
+702,"Calibration error; calibration memory is secured"
+703,"Calibration error; secure code provided was invalid"
+704,"Calibration error: secure code too long"
+705,"Calibration error; calibration aborted"
+706,"Calibration error: provided value out of range"
+707,"Calibration error: computed correction factor out of range"
+708,"Calibration error: signal measurement out of range"
+708,"Calibration error; signal frequency out of range"
+709,"Calibration error: no calibration for this function"
+710,"Calibration error: full scale correction out of range"
+711,"Calibration error: calibration string too long"
+713,"Calibration error; ADC calibration failed; ADC configuration 'ACI' did not converge"
+713,"Calibration error; ADC calibration failed; ADC configuration 'ACV' did not converge"
+713,"Calibration error; ADC calibration failed; ADC configuration 'DCV' did not converge"
+713,"Calibration error; ADC calibration failed; DC offset for setup 'ACI'"
+713,"Calibration error; ADC calibration failed; DC offset for setup 'ACV'"
+713,"Calibration error; ADC calibration failed; DC offset for setup 'DCV'"
+713,"Calibration error; ADC calibration failed; feedbackLutGainTune unsupported LUT goal"
+713,"Calibration error; ADC calibration failed; feedbackLutTune search did not converge"
+713,"Calibration error; ADC calibration failed; feedbackPiCancel did not converge for setup 'ACI'"
+713,"Calibration error; ADC calibration failed; feedbackPiCancel did not converge for setup 'ACV'"
+713,"Calibration error; ADC calibration failed; feedbackPiCancel did not converge for setup 'DCV'"
+713,"Calibration error; ADC calibration failed; fine merge for setup 'ACI'"
+713,"Calibration error; ADC calibration failed; fine merge for setup 'ACV'"
+713,"Calibration error; ADC calibration failed; fine merge for setup 'DCV'"
+713,"Calibration error; ADC calibration failed; fine offset for setup 'ACI'"
+713,"Calibration error; ADC calibration failed; fine offset for setup 'ACV'"
+713,"Calibration error; ADC calibration failed; fine offset for setup 'DCV'"
+713,"Calibration error; ADC calibration failed; fineDcCancel found non-monotonic value in setup 'ACI'"
+713,"Calibration error; ADC calibration failed; fineDcCancel found non-monotonic value in setup 'ACV'"
+713,"Calibration error; ADC calibration failed; fineDcCancel found non-monotonic value in setup 'DCV'"
+713,"Calibration error; ADC calibration failed; LUT gain for setup 'ACI'"
+713,"Calibration error; ADC calibration failed; LUT gain for setup 'ACV'"
Agilent Truevolt Series DMM Operating and Service Guide 283