Storage and clearing of readings
You can store up to 1,000 measurements in the reading memory of the 34460A or 10,000 measurements on the
34461A. Readings are stored in a first-in, first-out (FIFO) buffer; when reading memory is full, the oldest readings are
lost as newer readings are taken.
In Local (front panel) mode, the instrument collects readings, statistics, trend chart and histogram information in the
background, so if the user selects any of those options, the data is ready for viewing. In Remote (SCPI) mode, the
instrument does not collect this information by default.
Switching from Local to Remote does not clear readings.
In general, you turn the reading of measurements on and off by pressing [Run/Stop], as described above. You can
also take one reading or a specified number of readings by pressing [Single].
To save readings, simply press [Acquire] > Save Readings. Then use the menu that appears to configure the
location where you want to save the readings:
Press Save Readings to save the readings in memory to a file.
50 Agilent Truevolt Series DMM Operating and Service Guide
To Next Page
Loading...
Need help?
General
