Additional Notices
Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
This product complies with the WEEE Directive (2002/96/EC) marking requirement. The affixed product label (see
below) indicates that you must not discard this electrical/electronic product in domestic household waste.
Product Category: With reference to the equipment types in the WEEE directive Annex 1, this product is classified as a
"Monitoring and Control instrumentation" product. Do not dispose in domestic household waste.
To return unwanted products, contact your local Agilent office, or see www.agilent.com/environment/product for more
information.
Agilent 34138A Test Lead Set
The Agilent 34138A Test Lead Set, described below, is compatible with the Truevolt Series DMMs.
Test Lead Ratings
l Test Leads - 1000V, 15A
l Fine Tip Probe Attachments - 300V
l 3A Mini Grabber Attachment - 300V, 3A
l SMT Grabber Attachments - 300V, 3A
Operation
The Fine Tip, Mini Grabber, and SMT Grabber attachments plug onto the probe end of the Test Leads.
Maintenance
If any portion of the Test Lead Set is worn or damaged, do not use. Replace with a new Agilent 34138A Test Lead Set.
If the Test Lead Set is used in a manner not specified by Agilent Technologies, the
protection provided by the Test Lead Set may be impaired. Also, do not use a damaged or
worn Test Lead Set. Personal injury or death may result.
Agilent Truevolt Series DMM Operating and Service Guide 9
To Next Page
Loading...
Need help?
General
