Provisioning ports
...................................................................................................................................................................................................................................
When to use
Use this procedure to:
• know which ports are provisioned in an NE and how they are provisioned
• change the port mode for the alarm handling
• enable or disable test loops
Note: The provisioning ports procedure is also applicable to X5IP. Also note that the
type of the port E/FE/GbE LAN refers to 10/100/1000BASE-T(X) Ethernet Interface for
the X5IP card.
Related information
Before starting to modify NE ports it is assumed that:
• information about which port on which unit needs to be modified is available.
• there is no traffic on the ports that you want to test with a loopback.
• take care that loopbacks are disabled for normal operations. No normal traffic is
possible when a loopback is enabled.
Before you begin
Provisioning of timing ports is described in Chapter 7, “Timing provisioning”.
Procedure
The following procedure describes how a port can be provisioned. Each port type has a
different window, but the procedure is the same for all port types.
...................................................................................................................................................................................................
1
Select Provisioning → Transport → Ports or select Provisioning → Equipment →
Shelf display and right-click on a shelf or unit and select Port from the pop-up menu.
The
Provisioned NE Port Filter is displayed.
Choose:
•
All Ports to list all available ports -
•
Ports from Slot to restrict the amount of data to be uploaded from the NE. Only
the available ports from the selected slot are listed.
...................................................................................................................................................................................................
2
Click OK.
Result: The Provisioned NE Port Information List window appears with a list of
ports.
...................................................................................................................................................................................................
3
Select one of the ports in the Provisioned NE Port Information List window and
click
Details.
Equipment provisioning
...................................................................................................................................................................................................................................
5-60
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
To Next Page
Loading...
