Alcatel-Lucent 1643 AMS - Page 324

Select No Request or a switch request from the list for Switch Request.
Result: A switch is made.
...................................................................................................................................................................................................
6
In case the Signal Status of the timing source is Wait To Restore, and it must be reset,
click
Clear WTR.
Result: The Signal Status of the timing source changes from Wait to Restore into
the actual Signal Status of the timing source.
...................................................................................................................................................................................................
7
Click OK to confirm the current settings
Result: The Edit Provisioned NE Timing Source window disappears and data is
sent to the network element.
...................................................................................................................................................................................................
8
Click Close.
Result: The Provisioned NE Timing Source Information window disappears.
Edit global wait to restore time
To change the Global Wait to Restore Time follow this procedure:
...................................................................................................................................................................................................
1
Select Provisioning --> Timing --> Timing Sources
Result: The Provisioned NE Timing Source Information window appears.
...................................................................................................................................................................................................
2
Click Edit in the Global Wait To Restore field.
Result: The Edit Global Wait To Restore Time window appears.
...................................................................................................................................................................................................
3
Set the Global Wait To Restore Time.
...................................................................................................................................................................................................
4
Click OK to confirm the current setting.
Result: The global wait to restore time is set for the timing in the network
element, and the Edit Global Wait To Restore Time window disappears.
...................................................................................................................................................................................................
5
Click Close.
Result: The Provisioned NE Timing Source Information window disappears.
Timing provisioning Provisioning timing sources
....................................................................................................................................................................................................................................
7-22
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
E ND OF STEPS
...................................................................................................................................................................................................
E ND OF STEPS
...................................................................................................................................................................................................