Provision the QoS profile definitions
...................................................................................................................................................................................................................................
When to use
Provision of the QoS Profile definitions is possible only if the QoS configuration
capacity is set to Enable (see previous procedure).
Procedure
Complete the following steps to provision the QoS profile definitions:
...................................................................................................................................................................................................
1
Select Provisioning → LAN Management → QoS Profile
Result:
The NE LAN QoS Profile List window appears.
...................................................................................................................................................................................................
2
To add a QoS profile proceed with Step 3, to modify a QoS profile proceed with Step
4 and to delete a QoS profile proceed with Step 6.
...................................................................................................................................................................................................
3
Select Add Profile, fill the fields in the Add QoS Profile and click OK.
Result: The new QoS profile is displayed in the NE LAN QoS Profile List list.
...................................................................................................................................................................................................
4
Select the corresponding profile and click Edit.
Result: The parameter of the selected profile is displayed in the Edit QoS Profile
screen.
...................................................................................................................................................................................................
5
Change the definition and click OK.
Additional The parameters to be defined are described in “Parameters for
provisioning a QoS profile” (p. 8-131).
Result: The QoS profile is displayed in the NE LAN QoS Profile List list showing
the changed parameters.
...................................................................................................................................................................................................
6
Select the corresponding profile and click on Delete.
Result: The QoS profile is removed from the list.
E ND OF STEPS
...................................................................................................................................................................................................
Traffic provisioning
...................................................................................................................................................................................................................................
8-130
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
To Next Page
Loading...
