Result: The Edit Cross Connection window appears. The From and To and
Protection fields are filled in according to the selected cross-connection.
...................................................................................................................................................................................................
4
Change Cross Connection Type from SNC to Standard and click OK.
Result: The protection leg is removed. An unprotected cross-connection remains.
The Edit Cross Connection window closes and the modified cross-connection
appears in the list of the Cross Connection List window.
E ND OF STEPS
...................................................................................................................................................................................................
Traffic provisioning
Remove protection from an SNC/N protected
cross-connection
....................................................................................................................................................................................................................................
8-156
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
To Next Page
Loading...
