Alcatel-Lucent 1643 AMS - Page 632

Result: The current values of the monitored parameters gets updated in the
Performance Monitoring Measurements window.
By selecting the different tabs, all the different performance monitoring
measurements can be displayed.
...................................................................................................................................................................................................
5
Select a termination point from the list and click Edit...
Result: The Edit Performance Monitoring Point window appears and the
termination point settings can be viewed and edited.
...................................................................................................................................................................................................
6
Select a binning period tab and click Default and then, OK.
Result: The values of the measurement parameters fields return to their defined
default values.
If all counters need to be reset, select
Reset.
...................................................................................................................................................................................................
7
Select Close to return to the Active Performance Monitoring Points window.
Result: The Performance Monitoring Measurements window disappears and the
Active Performance Monitoring Points window reappears.
...................................................................................................................................................................................................
8
Go back to step 3 to display another point from the list.
...................................................................................................................................................................................................
9
Display termination points that are not listed in the Active Performance Monitoring
Points window by clicking on
Filter... and redefine applicable filters. Return to step
3 to view other termination point measurements.
...................................................................................................................................................................................................
10
Click Close.
Result: The Active Performance Monitoring Points window closes.
Viewing LAN measurements
Follow this procedure to view the LAN current PM counter for a selected termination
point.
...................................................................................................................................................................................................
1
Select Performance -> LAN.
Performance monitoring Displaying PM data
....................................................................................................................................................................................................................................
10-50
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
E ND OF STEPS
...................................................................................................................................................................................................