Result: The LAN Measurements window is displayed. The ITM-CIT is in LAN
measurement mode.
...................................................................................................................................................................................................
2
Click Update.
Result: Refreshes the window with the latest information.
...................................................................................................................................................................................................
3
Click Close.
Result: The LAN Measurements window closes.
Viewing unavailable period log
Follow this procedure to view the details of the UAP log.
...................................................................................................................................................................................................
1
Select Performance -> PM Current Measurements.
Result: The Performance Monitoring Point Filter window is displayed. The
ITM-CIT is in measurement mode.
...................................................................................................................................................................................................
2
Select a PM Point Type and its Slot, Port and any additional SDH level filters (if
applicable). And select
OK to apply the selection.
Result: The Active Performance Monitoring Points window appears.
...................................................................................................................................................................................................
3
Select a Performance Monitoring point from the list of provisioned termination points
and Click
Measurements...
Result: The Performance Monitoring Measurements window appears.
...................................................................................................................................................................................................
4
Select the UAP tab.
Result: The unavailable period measurements are displayed.
...................................................................................................................................................................................................
5
Click on Close.
E ND OF STEPS
...................................................................................................................................................................................................
Performance monitoring
Displaying PM data
....................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
10-51
E ND OF STEPS
...................................................................................................................................................................................................
To Next Page