Parameters for displaying PM data
...................................................................................................................................................................................................................................
AU4
Layer of a connection termination point. This list is populated with AU4s if the
selected PM Point Type is VC4 (VC-4-4c, VC-4-16c), AU4, TU12, TU2, or TU3. In
all other cases this field is greyed out.
BITs per second
Measurement parameter for the LAN Measurement mode. It is the measurement at the
Bridge from/to Ethernet, E1#* from/to Ethernet.
CbR
LAN measurement parameter. Stands for Total_number_of_octets_received. It
represents all the octets in each packets that have been successfully received and that
are passed to the switch.
CbS
LAN measurement parameter. Stands for Total_number_of_octets_sent. It represents all
the octets in packets that come from the switch and transmitted by the port.
Current value
Displays the value of the current counter for the related point and counter.
Dropped packets
Measurement parameter for the LAN Measurement mode. It is the measurement at the
Bridge from/to Ethernet.
Errored packets
Measurement parameter for the LAN Measurement mode. It is the measurement at the
Bridge from/to Ethernet, E1#* from/to Ethernet.
Elapsed time
Displays the elapsed time since the start of the current bin accumulation till the last
update of this screen.
Filter
Opens the PM Point Filter window and populates the list.
Performance monitoring
...................................................................................................................................................................................................................................
10-52
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
To Next Page
Loading...
