Alcatel-Lucent 5620 - Page 115

3 — Troubleshooting using network alarms
Alcatel-Lucent 5620 Service Aware Manager, Release 3-73
3HE 05723 TQZZA Edition 01 Troubleshooting Guide
Table 3-46 Domain: netw
Name: NatPlLsnMemberBlockUsageHigh
Type: equipmentAlarm (3)
Probable cause: resourceFull (53)
Severity: Major
Object Type (class): NatPool
Domain: nat
Implicitly cleared (self-clearing): Yes
The alarm is raised when the block
usage of a large-scale NAT address
pool reaches the high watermark.
The alarm clears when the block
usage reaches the low watermark.
Alarm Attributes Additional information
Name: ActivitySwitch
Type: communicationsAlarm (4)
Probable cause: systemFailed (144)
Severity: Critical
Object Type (class): NmsSystem
Domain: netw
Implicitly cleared (self-clearing): No
The alarm is raised when a 5620 SAM
main server activity switch occurs.
Name: BootConfigFailScriptNotAccesible
Type: configurationAlarm (11)
Probable cause:
bootConfigFailScriptNotAccesible (416)
Severity: Major
Object Type (class):
NetworkElement
Domain: netw
Implicitly cleared (self-clearing): No
The alarm is raised when a CLI script
that runs after NE configuration file
execution failure is inaccessible.
Name: BootConfigOKScriptNotAccesible
Type: configurationAlarm (11)
Probable cause:
bootConfigOKScriptNotAccesible (417)
Severity: Major
Object Type (class):
NetworkElement
Domain: netw
Implicitly cleared (self-clearing): No
The alarm is raised when a CLI script
that runs after NE configuration file
execution success is inaccessible.
Name: BootParametersMisconfigured
Type: configurationAlarm (11)
Probable causes:
• persistentIndexFailure (30)
• configFileBootFailure (31)
Severity: Critical
Object Type (class):
NetworkElement
Domain: netw
Implicitly cleared (self-clearing): Yes
The alarm is raised when the SNMP
Index Boot Status on an NE is not set
to Persistent.
Name: CliCommandFailure
Type: communicationsAlarm (4)
Probable cause: cliCommandFailure (300)
Severity: Warning
Object Type (class):
NetworkElement
Domain: netw
Implicitly cleared (self-clearing): No
The alarm is raised when a CLI
command on an NE fails.
Name: CliConnectionProblem
Type: communicationsAlarm (4)
Probable cause: cliConnectionProblem (230)
Severity: Warning
Object Type (class):
NetworkElement
Domain: netw
Implicitly cleared (self-clearing): No
The alarm is raised when the
5620 SAM fails to open a CLI session
on an NE because the number of
open CLI sessions on the NE is at the
maximum.
Name: CliLoginFailed
Type: communicationsAlarm (4)
Probable cause: cliLoginFailed (229)
Severity: Warning
Object Type (class):
NetworkElement
Domain: netw
Implicitly cleared (self-clearing): No
The alarm is raised when a CLI login
attempt fails because of an incorrect
user name or password.
(1 of 11)
Alarm Attributes Additional information
(2 of 2)
Aug 2010
AAAD
8.0 R4