12 — 5620 SAM client GUI warning message output
Alcatel-Lucent 5620 Service Aware Manager, Release 12-5
3HE 05723 TQZZA Edition 01 Troubleshooting Guide
Verify that the requested action is appropriate. Click on the checkbox beside the
statement “I understand the implications of this action” to continue with the action.
Duplicate configuration form conflicts
There are multiple ways to access a configuration form for the same object. For
example, you can view the configuration form for a port by choosing
Manage→Equipment, or you can access the port from the Application→Equipment
Window form. When you try to perform both accesses, a warning message is
displayed, as shown in Figure 12-7.
Figure 12-7 Duplicate form warning dialog box
When this warning message is displayed, another form is open for the same object.
When two forms are open concurrently for the same object, there may be unexpected
results because changes committed from one form are not reflected in the other form.
12.2 Responding to 5620 SAM client GUI warning messages
The following procedure describes how to respond to a warning message when you
perform an action with the 5620 SAM client.
Procedure 12-1 To respond to a warning message
1 Perform an action.
A warning message dialog box opens. For example, when you configure a site
password policy, at least one authentication order must be specified as the
default in order to configure the authentication order parameters. If at least one
authentication order is not configured, a warning message is displayed, as shown
in Figure 12-8.
Figure 12-8 Authentication warning dialog box
2 After you read the warning message, click on the OK button. The warning message
dialog box closes.
To Next Page
Loading...
