Alcatel-Lucent 5620 - Procedure 6-3 to Manage Filters Using the GUI Filter Manager

6 — 5620 SAM LogViewer
6-12 Alcatel-Lucent 5620 Service Aware Manager, Release
Troubleshooting Guide 3HE 05723 TQZZA Edition 01
6 Choose an ANSI display attribute from the drop-down list beside each of the
following parameters to specify how the CLI application displays the
corresponding text.
• Normal Display—for normal application text
• Trace Level Display—for trace-level log entries
• Debug Level Display—for debug-level log entries
• Info Level Display—for info-level log entries
• Warning Level Display—for warning-level log entries
• Error Level Display—for error-level log entries
• Fatal Level Display—for fatal-level log entries
• Filter Display—for filtered log entries
7 Click on the SAM tab to configure the parameters that are specific to the
5620 SAM.
8 Configure the following parameters by clicking in the parameter field and using
the browser form that opens to specify a directory:
• Database Location—specifies the base 5620 SAM database installation
directory
• Oracle Location—specifies the base 5620 SAM Oracle installation directory
• NMS Root—specifies the nms directory under the base 5620 SAM server
installation directory
9 Click on the Advanced tab to configure the parameters related to LogViewer
performance.
Procedure 6-3 To manage filters using the GUI Filter Manager
Perform this procedure to create, modify, assign or delete a LogViewer filter.
1 Choose Log→Filter Manager from the LogViewer main menu. The Filter Manager
applet opens.
2 Perform the following steps to add a filter.
i Click on the Add button. The Add Filter form opens.
ii Configure the Name parameter by specifying a unique name for the filter.
Caution — The parameters on the Advanced tab typically require
configuration only when LogViewer has performance problems. Consult
Alcatel-Lucent technical support before you attempt to modify a
parameter on the Advanced tab, as it may affect server performance.
Note — The Filter Manager is opened from within LogViewer, but runs
as a separate applet. This enables the dragging and dropping of filters
between Filter Manager and the Filters sub-tab of a lob tab.
Aug 2010
AAAD
8.0 R4