Alcatel-Lucent 5620 - Network Topology Map Overview

5 — Troubleshooting using topology maps
5-2 Alcatel-Lucent 5620 Service Aware Manager, Release
Troubleshooting Guide 3HE 05723 TQZZA Edition 01
5.1 Network topology map overview
Several network topology maps are available on the 5620 SAM.
The maps display network objects. You can open contextual menus and submenus to
open forms with additional information. For more information about topology maps,
see the 5620 SAM User Guide.
The maps can be used for provide a view of the network from different perspectives
for monitoring and troubleshooting activities. Depending on your requirements, the
maps can display a low-level equipment and interface network view, or a specific
customer or service view. One or many maps can be open at the same time.
Table 5-1 lists the maps that are available and how they are accessed.
Table 5-1 5620 SAM map views
The maps represent interfaces, paths, managed devices, and unmanaged devices, as
described in Table 5-2.
Menu option Function
Application→Physical Topology View the Physical Topology map.
Application→LSP Topology View the LSP Topology map.
Application→Service Tunnel Topology View the Service Tunnel Topology map.
Application→Flat Maps→Physical Topology View the Physical Topology - Flat map.
Application→Flat Maps→LSP Topology View the LSP Topology - Flat map.
Application→Flat Maps→Service Tunnel
Topology
View the Service Tunnel Topology - Flat map.
Manage→Composite Services Create composite services and view the
Composite Service Topology map and the
Composite Service Flat Topology map.
Manage→MPLS→MPLS Paths Create MPLS paths and view topology map for
provisioned MPLS paths. See the 5620 SAM User
Guide for more information about creating MPLS
paths.
Manage→MPLS→Dynamic LSPs Create LSPs and view topology for provisioned,
actual, and CSPF LSP paths, and LSP
cross-connects. See the 5620 SAM User Guide
for more information.
Manage→MPLS→Manual Bypass LSPs
Manage→MLPS→Static LSPs
Manage→Service Tunnels Create service tunnels. See the 5620 SAM User
Guide for more information.
Create→Equipment→Create Group Create topology groups to organize the network.
Create→Equipment→Create Physical Link Create physical links to view L1 network
connectivity.
Aug 2010
AAAD
8.0 R4