6 — 5620 SAM LogViewer
6-14 Alcatel-Lucent 5620 Service Aware Manager, Release
Troubleshooting Guide 3HE 05723 TQZZA Edition 01
iii Modify the match criteria as required.
iv Click on the OK button to save the filter.
5 To make a copy of a filter, select the filter and click on the Copy button. A copy
of the filter is listed on the Filter Manager form.
6 To edit a filter, select the filter and click on the Edit button. Configure the
parameters described in step 2.
7 To delete a filter, select the filter and click on the Delete button
Procedure 6-4 To specify a plug-in using the LogViewer GUI
Perform this procedure to configure and enable plug-ins for a log file.
1 Choose File→Local Log File from the LogViewer main menu, or click on the Open
log button in the log tab tool bar. The Local Log File form opens.
2 Use the form to navigate to the log-file location.
3 Select a log file and click on the Add button between the form panels. The log is
listed in the panel on the right.
4 Click on the Plugins tab button.
5 Choose a plug-in from the Plugin drop-down list.
6 If you choose the Bring to Front plug-in, perform the following steps.
i Specify a regular expression as a match criterion in the Message Filter field.
ii Go to step 8.
Note — The log file can be in compressed or uncompressed format.
To Next Page
