Alcatel-Lucent 5620 - Alarm Description Tables

3 — Troubleshooting using network alarms
Alcatel-Lucent 5620 Service Aware Manager, Release 3-23
3HE 05723 TQZZA Edition 01 Troubleshooting Guide
3.5 Alarm description tables
The following tables describe the alarms that the 5620 SAM can raise. The tables are
in alphabetical order by domain, and the alarms within each table are in alphabetical
order. A Type or Probable cause value includes a numeric identifier.
Table 3-2 Domain: accounting
Table 3-3 Domain: antispoof
Table 3-4 Domain: aps
Note — This section does not contain 9471 MME alarms.
For 9471 MME alarm descriptions, see the 9471 MME Alarms
Dictionary.
Alarm Attributes Additional information
Name: AccountingPolicyDown
Type: AccountingPolicy (54)
Probable cause: accountingPolicyDown
(414)
Severity: Critical
Object Type (class): Policy
Domain: accounting
Implicitly cleared (self-clearing): Yes
The alarm is raised when an
accounting policy goes operationally
down after a file creation failure at
the specified admin and backup
locations.
Alarm Attributes Additional information
Name: SapStaticHostDynamicMacConflict
Type: configurationAlarm (11)
Probable cause:
LearnedDynamicMacAlreadyLearned (243)
Severity: Minor
Object Type (class):
AntiSpoofingStaticHosts
Domain: antispoof
Implicitly cleared (self-clearing): No
The alarm is raised when an NE tries
to learn a dynamic MAC address from
an IP-only static host.
Alarm Attributes Additional information
Name: IncorrectNeighborConfig
Type: configurationAlarm (11)
Probable cause: incorrectNeighborConfig
(452)
Severity: Major
Object Type (class): ApsGroup
Domain: aps
Implicitly cleared (self-clearing): Yes
The alarm is raised when the peer
does not exist or the neighbor
address does not point to a network
interface on the NE that contains the
peer object.
Aug 2010
AAAD
8.0 R4